Navico Fuel Flow Sensor with 10ft Cable

Fuel flow sensor with 10ft cable and T-connector. Outputs: • Fuel Flow • Tank Fuel Used • Trip Fuel Used • Seasonal Fuel Used Specs: • One required per engine • Up to 3 engines supported • Fuel line diameter: 3/8" (9.5 mm) ID • Flow rate measured: Optimized for 0.6-45 Gal/hr but can measure outside these values • Added back pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr • Installation location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line • Fuel type: Gasoline only* • Hole required to route through a bulkhead: 22mm (7/8") • Multiple fuel flow sensors possible *Please note: The Fuel Flow Sensor does not operate diesel engine fuel systems.